Reverse Laminar Air Flow Booth

Product Details:

sampling Booths provide containment by utilizing high velocity air to capture airborne dust particles. Downflow Booths are versatile devices that can:

Be used to control exposure risk to hazardous materials for a wide variety of equipment and processes.

When used correctly, provide Operator Exposure Levels (OEL's) ≤100 micrograms/meter3 over an 8 hour Time Weighted Average (TWA).

Enhance cGMP practices.

We offer Sampling Dispensing Booth to our clients.

Features:

Waterproof

Long lasting finish

Rust-free

Compact design

Less maintenance

Modular, easy-to-clean rigid design with minimal joints.

Single, Two-Stage or Three-Stage HEPA/ULPA filtration can be accommodated.

Removable bulkhead panels enable access to fine dust filter for service from inside the booth.

Re-circulatory Airflow or Single Pass Airflow if solvent or hazardous fumes are present in the process (may also require explosion proof electricals).

Cooling Coils can be fitted to offset heat gains in re-circulatory airflow systems.

HEPA/ULPA gel-seal downflow filters are replaceable from within the boot. Gel-seal is more reliable than conventional gasketed seals.

Voltage-compensating blower(s) ensure stable airflow.

Magnehelic gauges provide convenient and reliable means for monitoring booth airflow.

Booths ship knocked-down for site assembly.

Compact ceiling and rear plenums maximize usable work area while minimizing floor space.

IQ/OQ protocols available.

Energy-efficient tear-drop light fittings minimize airflow disruption.

Comprehensive factory and site acceptance tests include: filter integrity, particle count (air cleanliness), downflow velocity and uniformity, exhaust velocity/volume, containment zone verification, noise level, light intensity, temperature rise and electrical safety.

Containment performance verified according to the ISPE Good Practice Guide, Assessing the Particulate Containment Performance of Pharmaceutical Equipment.

Additional Information:

• Item Code: RLAF
• Delivery Time: 3-4 weeks from date of po

Product Details:

weighing booths provide product and personal protection during the weighing of powdery substances. These conditions are ensured by means of targeted recirculation. A clean and low-turbulence air flow (laminar air flow) vertically flows into the work area of the weighing booth and is exhausted close to the bottom. Airborne substances are collected in a controlled manner. The integrated exhaust air system, which generates a slight negative pressure in the working area of the weighing booth, permanently protects the ambient area against contamination. The weighing booth does not need to be connected to the on-site supply or exhaust air system.

• Self-supporting powder-coated stainless steel (1.4301) or sheet steel construction
• Laminar air flow recirculation system
• Lateral and front flow restriction with anti-static PVC curtain, front entrance clearance of 1.9m
• 4x 270V CEE sockets
• Pre-filter stage: G4 filter mat behind perforated plate
• Pre-filter stage: F9 compact filter cartridges
• HEPA filter H14 for process air and exhaust air
• Perforated plate air outlet surface
• Integrated cooling system incl. mixed water control for condensate-free cooling
• Automatic fan control for a constant LAF speed
• LED lighting
• Control system in a separate switch cabinet
• Technical documentation according to the Machinery Directive
• Qualification documentation
• GMP-/FDA-compliant design
• CE declaration of conformity

Weighing Booth (special design)

Special design possible upon request, for example:

• Adapted geometry and size 
• ATEX model
• Bag in/bag out pre-filter for contamination-free filter changes 
• Integration of a weighing system
• Integration of lifting systems

Product Details:

Downflow Booths provide containment by utilizing high velocity air to capture airborne dust particles. Downflow Booths are versatile devices that can:

• Be used to control exposure risk to hazardous materials for a wide variety of equipment and processes.
• When used correctly, provide Operator Exposure Levels (OEL's) ≤100 micrograms/meter3 over an 8 hour Time Weighted Average (TWA).
• Enhance cGMP practices.

*Features:-

• Modular, easy-to-clean rigid design with minimal joints.
• Single, Two-Stage or Three-Stage HEPA/ULPA filtration can be accommodated.
• Removable bulkhead panels enable access to fine dust filter for service from inside the booth.
• Re-circulatory Airflow or Single Pass Airflow if solvent or hazardous fumes are present in the process (may also require explosion proof electricals).
• Cooling Coils can be fitted to offset heat gains in re-circulatory airflow systems.
• HEPA/ULPA gel-seal downflow filters are replaceable from within the boot. Gel-seal is more reliable than conventional gasketed seals.
• Voltage-compensating blower(s) ensure stable airflow.
• Magnehelic gauges provide convenient and reliable means for monitoring booth airflow.
• Booths ship knocked-down for site assembly.
• Compact ceiling and rear plenums maximize usable work area while minimizing floor space.
• IQ/OQ protocols available.
• Energy-efficient tear-drop light fittings minimize airflow disruption.
• Comprehensive factory and site acceptance tests include: filter integrity, particle count (air cleanliness), downflow velocity and uniformity, exhaust velocity/volume, containment zone verification, noise level, light intensity, temperature rise and electrical safety.
• Containment performance verified according to the ISPE Good Practice Guide, Assessing the Particulate Containment Performance of Pharmaceutical Equipment.

Additional Information:

• Item Code: DB
• Production Capacity: 17 Unit per week
• Delivery Time: as per client requirment

Product Details:

We offer Downflow Booth to our clients.Designed with precision, the Reverse Laminar Air Flow is ideal for Operator Protection, Product Protection and Environment Protection. Based on the smooth working profile and high-end performance of our Reverse Laminar Air Flow, we are ranked amidst notable Reverse Laminar Air Flow Manufacturers, Suppliers and Exporters from India. Furthermore, Reverse Laminar Air Flow can be customized to suit the precise requirements of the clients.

Specifications :Maximum protection from airborne contaminants produced at the time of powder handling operations such as charging, sampling, and dispensingPowder coated Mild Steel, SS 304 / SS 316 / SS 316L or a combination of bothDown flow booth functions on a recirculatory airflow principleAt the base of the rear wall there is Prefilter to capture the airborne generated contaminants. Intake velocity at prefilters increases to offer scavenging effectContinuous, clean, laminar down flow of Class 100 air supplied to work area in order to suppressAny dust clouds produced during open powder processingAnd eradicate and capture airborne particles from the operator''s breathing zoneTriple Stage filtrationEU6 â Prefilter (95% down to 5 micron)EU14 - HEPA Filter â Supply (99.999% down to 0.3 micron)EU7 â INTERMEDIATE FILTER â Supply / Exhaust (95% down to 3 micron)Balanced Motor-blower with suspension arrangement for diminishing the noise levelInternal covings for easy cleaningSS 304 Double walled Side PanelsDOP Test port at upstream of HEPA filterDifferential Pressure Gauge : 3 Nos to monitor pressure drop across three stages of filters.On / Off Switch for Motor5/15 Amp Switch Socket for external equipmentFluorescent Light with Milky White Diffuser

Additional Information:

• Item Code: RLAFBOOTH

Product Details:

Solvent Booths:-

"These are drum booths intended to provide low ppm containment during the transfer and handling of liquids, such as drum to drum transfer or drum to process reaction vessel.

Thereby ensuring safety and security of personnel involved during transfer of substances"

The single pass booth operates a vertical airflow, pushing dusts and vapours downwards and away from the operator’s breathing zone with air discharged through a fume scrubber to atmosphere ensuring that solvent fume laden air will not be recirculated back into the booth and minimising the risk of explosion associated with solvent fumes.

Additional Information:

• Item Code: SB